Restek at the 40th International Symposium on Capillary Chromatography and 13th GCxGC Symposium

Restek is proud to have numerous presentations in the orals scientific program for the 4oth ISCC and 13th GCxGC Symposium, which will take place in Riva del Garda, Italy in May.

Exploding a Peak Capacity Increase Record by Using Hydrogen Carrier Gas for Comprehensive Two-Dimensional Gas Chromatography – Time-of-Flight Mass Spectrometry (Jack Cochran, Julie Kowalski, Christopher Rattray, Amanda Rigdon, Jaap de Zeeuw; Restek and Mark Merrick; LECO)

Achieving a Near-Theoretical Maximum in Peak Capacity Gain for the Analysis of Ignitable Liquids Using GCxGC-TOFMS (Katie Nizio, Shari Forbes; University of Technology Sydney, and Jack Cochran; Restek)

Time Interval Deconvolution of Polychlorinated Biphenyls in Aroclor Mixtures Using Gas Chromatography – Vacuum Ultraviolet Spectroscopy (Kevin Schug, Changling Qiu; University of Texas at Arlington and Jonathan Smuts, Phillip Walsh; VUV Analytics and Jack Cochran; Restek)

3D Printed Capillary Columns (Roy Lautamo, Bill Bromps; Restek)

Finally, A Significant Improved Chromatographic Separation of Argon and Oxygen Using New Plot Column Phase and Deposition Technologies (Jaap de Zeeuw, Bill Bromps, Ashlee Reese, Roy Lautamo; Restek)

2 Responses to “Restek at the 40th International Symposium on Capillary Chromatography and 13th GCxGC Symposium”

  1. jaap says:

    And don’t forget the posters:

    – A Simple and flexible methanizer Solution for low level CO/CO2 Gas Analysis by Gas Chromatography

    – DiatoSorb W, a new High Performance Chromatographic Diatomaceous Earth used as support in Packed columns

    – Reduce analysis time and optimize separations, while maintaining the same peak elution order: A new free software tool in GC: EZ-GC Method translator

    and Restek’s Company Seminar featuring:

    – Optimize separation and reduce run times using a new FREE software tool in GC: EZ-GC Method Translator. Learn how to get exact the same peak elution order when changing carrier gas, column dimensions, moving from FID to MS or changing the column flow.

    – “Shoot and Dilute GC” : Get more analysis and reduced maintenance by smart use of split injection.

  2. […] won’t be fully realized.  I can easily demonstrate that with some recent work I did for an upcoming lecture at the 40th International Symposium on Capillary Chromatography and 13th GCxGC Symp….  Note in the figure below how the Stabilwax column in the second dimension pulls apart the […]

Leave a Reply


Restek Domestic Customer Service

Subject

Message

Your Full Name

Your Email

Company Name

Address

Spam Block (Please leave this blank)

all fields required

Thank you

Your message has been sent. We will be in touch shortly.

Message not sent

Sorry, your message could not be sent at this time. Please try again later, or contact Restek or your local Restek representative via phone.

www.restek.com/Contact-Us